DEENNLHR
LionsBot · Autonomous Sweeper

LionsBot S3 Sweeping Robot

The autonomous sweeping robot for large areas. The S3 picks up fine dust and larger debris in a single pass, cleans right up to the wall with a 780 mm working width and returns to its station on its own when it rains.

Dust & debris in one pass 0 mm edge cleaning Up to 10 h runtime
LionsBot S3 autonomous sweeper
780 mmWorking width
0 mmEdge cleaning
40 lWaste bin
10 hMaximum runtime
2,300 m²/hMax. cleaning rate
Performance

Dirt and debris in a single pass

Ramps, narrow paths and wall edges: the S3 is built for the day-to-day reality of a site, not just for open floor space.

✓Fine dust and larger debris: paper towels, wood chips, bottles and cans end up in the 40-litre bin in the same pass.
✓Right up to the wall: 780 mm working width with 0 mm edge cleaning.
✓Long shifts: up to 10 hours of runtime, recharged in 2.5 hours.
LionsBot S3 sweeping cans and bottles in a warehouse
LionsBot S3 cleaning right along the wall edge
Cleans right up to the wall

A 780 mm working width with 0 mm edge cleaning covers corners and wall edges without a second pass.

LionsBot S3 on a car park ramp
Handles ramps and gradients

Gradients of up to 8° do not interrupt cleaning. We check steeper ramps during the site analysis.

Underside of the LionsBot S3 with filter system
Active dust control

High-flow negative-pressure ventilation keeps fine particles inside the bin. The S3 cleans its dust filter automatically, with no one having to step in.

Intelligence

Detects debris, obstacles and rain

The S3 does more than simply cover the floor. It detects where dirt builds up, avoids people and objects and safely pauses cleaning when the weather turns.

LionsBot S3 detecting debris with AI SpotSense
AI SpotSense™

Detects spots with debris and cleans them specifically, instead of only covering the area evenly.

LionsBot S3 detecting a person in an underground car park
Avoids obstacles

AI NavSense™ detects people and low objects in its path. No one has to step in.

LionsBot S3 in a covered entrance area in the rain
Returns when it rains

The rain sensor detects rainfall and sends the S3 back to its station. Cleaning pauses safely.

Fleet teamwork

The S3 sweeps first. The R5 scrubs afterwards.

The S3 works together with the other robots on site. The team gets more done, without duplicated work and without supervising every robot by hand.

S3 + S3 · Seamless coverage

If one S3 needs to charge or is interrupted, another S3 takes over the unfinished area.

S3 + R5 · Hand in hand

The S3 removes loose dust and debris and signals the R5 to scrub the same zone in the right order.

LionsBot S3 sweeping robot and R5 scrubber-dryer robot together in a supermarket
LionsBot S3 entering a freight lift
Integration

One job, several floors

The S3 can be connected to existing lifts, barriers and automatic doors. This lets it complete a cleaning job across several floors without anyone having to move it.

✓Multi-storey and underground car parks with lifts and barriers
✓Warehousing and logistics across several hall levels
✓Integration by salesmotion: we plan and support the connection to your building systems, from site analysis to commissioning.
LionsCloud

One operator runs the whole fleet

The S3 reports to LionsCloud, the fleet software from LionsBot. Schedule cleaning runs, monitor every S3 and R5 on site and pull reports via the web dashboard or app, however many robots are in use.

✓Plan zones once and let the fleet repeat them
✓Automatic report for every cleaning run, ready for audits (e.g. food and pharma standards)
✓One view for every S3 and R5 you operate
Two LionsBot S3 robots sharing two cleaning zones
Applications

Built for large, busy and semi-outdoor sites

Large concrete floors, dusty parking levels, loading docks and covered areas that are open to the outside. This is where the S3 shows its strengths.

LionsBot S3 in a warehouse
Warehousing, logistics & manufacturing

Pallet splinters, stretch film and cardboard dust are gone in one pass. An R5 can then scrub the same floor, documented for the audit.

LionsBot S3 in the entrance area of a shopping centre
Retail

Aisles, semi-covered yards, trolley bays and garden centres. Scheduled runs are finished before the doors open. The S3 is not intended for areas fully exposed to the weather.

LionsBot S3 changing floors by lift
Car parks, transport hubs & venues

Covered and underground car parks, terminals and halls. Nightly sweeping runs maintain the standard between deep cleans.

Performance in figures

S3 technical data

LionsBot S3 front view
Physical properties
Dimensions (L×W×H)910 × 780 × 480 mm
Weight80 kg
Cleaning width780 mm
Minimum passage width800 mm
Turning width1,200 mm
Waste binapprox. 40 l
Cleaning performance & runtime
Max. cleaning rateup to 2,300 m²/h
Max. speed (adjustable)up to 1.2 m/s
Max. gradeabilityup to 8°
Edge cleaning0 mm
Max. runtimeup to 10 h
Charging time2.5 h
Navigation & operating environment
3D LiDAR · 3 colour cameras · 3 depth cameras · 2 ToF sensors. For indoor areas and covered, semi-outdoor spaces. Not for areas fully exposed to the weather.

Manufacturer figures based on internal LionsBot tests. Values may vary depending on site and settings; individual features may be rolled out gradually.

Sweeping robots compared

LionsBot S3 or Pudu MT1?

We offer two robots for autonomous sweeping in warehouses, industry and car parks. The table puts the manufacturer figures side by side. We supply and support both ourselves.

Manufacturer figureLionsBot S3at salesmotionPudu MT1Base model · at salesmotion
Working width780 mm700 mm
Edge cleaning0 mmn/a (MT1 Max: 0 cm)
Waste binapprox. 40 l35 l
Max. cleaning rateup to 2,300 m²/hup to 1,800 m²/h, up to 6,000 m²/h in spot mode
Runtimeup to 10 h4–8 h
Charging time2.5 h< 3 h
Gradeabilityup to 8°n/a (MT1 Max: up to 8°)
Max. speed1.2 m/s1.2 m/s
Dimensions (L×W×H)910 × 780 × 480 mm840 × 600 × 490 mm
Weight80 kg65 kg
Navigation & sensors3D LiDAR, 3 colour cameras, 3 depth cameras, 2 ToF sensorsVSLAM, markers, LiDAR SLAM

Manufacturer figures, retrieved in November 2026: LionsBot, Pudu Robotics. The values are based on each manufacturer’s own tests, were not measured by salesmotion and are only comparable to a limited extent because test conditions differ. n/a = no manufacturer figure found. Brand names belong to their respective owners.

LionsBot S3
When long shifts matter

The longer stated runtime and the wider working width. The S3 runs in LionsCloud alongside the R5 and comes with a rain sensor for semi-outdoor areas.

Talk to us about the S3 →
Pudu MT1
When it needs to be compact

The narrower build and lower weight, plus a spot mode for localised dirt. The MT1 Vac and MT1 Max are variants for vacuuming and for harsh environments.

View the Pudu MT1 series →

Which of the two sweeping robots makes economic sense on your site depends on floor area, type of dirt, ramps and cleaning windows. We clarify this in the free site analysis and support commissioning, training and service through our technician network.

Global quality, data & sustainability

Certified for data protection, security and sustainability

LionsBot complies with GDPR, SOC 2, SOC 3, ISO 9001, ISO 14001, ISO 27001 and ISO 45001. EcoVadis and EPD recognise its environmental commitment. The S3 is designed and engineered in Singapore. LionsBot counts more than 7,000 installations in over 40 countries.

GDPR SOC 2 SOC 3 ISO 27001 ISO 9001 ISO 14001 ISO 45001 EcoVadis EPD
More on data protection & LionsCloud – the command centre for your fleet →

The rest of the LionsBot fleet

All cleaning robots →
FAQ

Frequently asked questions about the S3

What is the LionsBot S3?+
An autonomous sweeping robot for large, dusty and semi-outdoor areas such as warehouses, logistics centres and car parks. It sweeps fine dust and larger debris such as paper towels, wood chips, bottles and cans into a 40-litre bin in a single pass, with a 780 mm working width and 0 mm edge cleaning.
How does the S3 differ from the R5?+
The S3 sweeps dust, dirt and debris on large and rougher floors, while the R5 scrubs sealed hard floors. Where both are needed, the S3 sweeps a zone first and then signals the R5 to scrub the same area.
Can the S3 be used in car parks and loading zones?+
Yes, in covered and multi-storey car parks, underground car parks and loading zones. It is not intended for open-air car parks. It detects people and low objects, handles gradients of up to 8° and works best when traffic is light, for example at night.
What happens if it rains during cleaning?+
A rain sensor detects rainfall and sends the S3 back to its station. Cleaning is paused safely instead of continuing in the rain.
Can the S3 clean several floors?+
Yes. The S3 can be connected to existing lifts, barriers and automatic doors and can therefore complete a cleaning job across several levels. We clarify the connection to your building systems during the site analysis.
LionsBot S3 or Pudu MT1 – which sweeping robot is the right fit?+
Both are autonomous sweeping robots from our portfolio. According to the manufacturers, the S3 has the wider working width (780 instead of 700 mm) and the longer runtime (up to 10 hours) and works together with the R5 in LionsCloud. The Pudu MT1 is narrower and lighter and offers a spot mode as well as the MT1 Vac and MT1 Max variants. We clarify which robot fits in the site analysis.
Can the S3 be used outdoors?+
The S3 is designed for indoor areas and covered, semi-outdoor spaces such as loading zones, covered yards and car parks. It is not intended for areas fully exposed to the weather or for open-air car parks. When it rains, the rain sensor sends it back to its station.
Can I buy, lease or rent the S3 from salesmotion?+
Yes. As an official LionsBot distributor we offer purchase, leasing and rental. We handle site analysis, commissioning and service through our technician network and tailor the right model to your site with a transparent business case.

Is the S3 right for your site?

We look at ramps, loading zones and floor areas and show where the S3, followed by the R5, would work. Free of charge and without obligation.

WA Tel Request a consultation