DEEN
LionsBot · Sweeping & Scrubbing Robot

LionsBot R3 Scrub Pro

The compact 2-in-1 robot for hard floors: sweeps and scrubs in a single pass – no pre-sweeping required. Two side brushes guide debris from the edge to the centre, enabling edge cleaning down to 0 cm.

0 cm edge cleaning 2-in-1: sweeping + scrubbing No pre-sweeping needed
LionsBot R3 Scrub Pro sweeping and scrubbing robot
0 cmEdge cleaning
800–1,200 m²/hAvg. practical cleaning rate
7 kgBrush pressure (max.)
3 hMax. runtime, 2 h charge time
21 LFresh water tank
In Action

Clever, efficient and built for what's next: how the R3 Scrub Pro cleans

Simple & smart during regular store hours – watch the R3 Scrub Pro handle the daily clean in food retail.

Edge Precision

Right up to the edge – without pre-sweeping

The R3 Scrub Pro combines cylindrical main brushes with two side brushes: fine debris is guided from edges and skirting boards to the centre, picked up and collected in the debris bin – sweeping and wet cleaning in a single pass.

0 cm edge cleaning – no dust line along skirting, shelving and corners
2-in-1 mechanism – sweeps and scrubs simultaneously, no pre-sweeping required
682 mm cleaning width with side brushes, 366 mm brush width – at a machine width of just 570 mm
LionsBot R3 Scrub Pro cleaning close to the edge along shelving
LionsBot R3 Scrub Pro – water system x-ray view
Cleaning Performance

Deep wet clean, instantly dry

Up to 7 kg of brush pressure and selectable brush types adapt the cleaning intensity to the floor covering – effective yet gentle on the surface. The patent-pending, magnet-driven squeegee leaves the floor clean and dry in a single pass.

Up to 7 kg brush pressure – brushes in soft, standard and hard plus a microfibre roller
Patent-pending squeegee – improved airflow design for dry floors in a single pass
21 L fresh water / 24 L recovery tank – built for long cleaning windows
Autonomy & Operation

One press of a button. The rest runs itself.

MagicTag removes the set-up: select the route, localise the robot and activate the optimal cleaning settings – with a single press of a button. Schedules run fully autonomously, including automatic return to the charging dock and resuming the clean.

MagicTag – start cleaning without a lengthy set-up
Three ways to operate – touchscreen, manual mode or app start
Autonomous schedules – recharges, resumes and finishes on its own
LionsBot R3 Scrub Pro from above – touchscreen with one-button start
Sensors & Navigation

How the R3 Scrub Pro sees its surroundings

A sophisticated sensor network captures the environment in real time: active tracking technology identifies moving and static obstacles during cleaning and navigates safely around them.

Full sensor coverage – 5 depth cameras, 6 sonar sensors, 25 m LiDAR
Optional 3D LiDAR – more precise mapping with up to 240 m coverage
Active obstacle tracking – detects people and objects in motion
Genuine 3D LiDAR SLAM footage: the environment as the R3 Scrub Pro sees it.
Deployment Scenarios

Where the R3 Scrub Pro plays to its strengths

R3 Scrub Pro in retail
Retail & Sales Floors

Edge-close cleaning along shelving and displays – a clean edge finish without manual touch-up.

R3 Scrub Pro in a public building
Public Buildings & Healthcare

Corridors, waiting areas and entrances on a fixed schedule – thorough right up to skirting and transitions.

R3 Scrub Pro in a warehouse
Logistics & Warehousing

Narrow aisles between racking – a compact footprint and a 0 cm edge instead of a wide turning circle.

Performance in Numbers

Technical Specifications R3 Scrub Pro

Physical Dimensions
Dimensions (L×W×H)635 × 570 × 828 mm
Weight85.5 kg
Cleaning width366 mm / 682 mm with side brushes
Squeegee width591 mm
Tank capacity21 L fresh / 24 L recovery
Debris bin0.45 L
Cleaning Performance
Brush pressureup to 7 kg
Max. speed1.0 m/s
Avg. practical cleaning rate800–1,200 m²/h
Max. runtime / avg. charge timeup to 3 h / 2 h
Noise level (avg.)71 dB
Max. LiDAR coverage25 m / 240 m with opt. 3D LiDAR
Navigation & Accessories
5 depth cameras · 6 sonar sensors · 25 m LiDAR · optional 3D LiDAR. Accessories: charging dock, Refuel Station, cylindrical brushes (soft, standard, hard), side brushes, microfibre roller, squeegee blades, MagicTag. Suitable for hard floors.
Accessories & Autonomy

Built for unattended continuous operation

With the right station, the R3 Scrub Pro returns on its own, recharges, refills water – and is ready to go again without any manual intervention.

LionsBot R3 Scrub Pro charging dock

Charging Dock

The R3 Scrub Pro returns autonomously and docks by itself. After around 2 hours of charging it resumes the cleaning run on its own.

LionsBot R3 Refuel Station with water supply and drain

Refuel Station

Automatic fresh-water refill and dirty-water drainage via a fixed water connection – for long, unattended scheduled runs.

Global Quality, Data & Sustainability

Certified for data protection, safety and sustainability

LionsBot meets the GDPR, SOC 2, ISO 9001, ISO 14001 and ISO 45001 standards – and is recognised by EcoVadis and EPD for its environmental commitment. Designed and built in Singapore.

DSGVO / GDPR SOC 2 Type 2 ISO/IEC 27001:2022 ISO 9001 ISO 14001 ISO 45001 EcoVadis Red Dot Award 2024 iF Design Award
More on data protection & LionsCloud – your fleet's command centre →

Not sure the R3 Scrub Pro is the right fit?

All cleaning robots →
FAQ

Frequently asked questions about the R3 Scrub Pro

How does the R3 Scrub Pro differ from the R5?+
The R3 Scrub Pro is the compact model for angled layouts and detail-critical zones: 2-in-1 sweeping and scrubbing with edge cleaning down to 0 cm. The R5 plays to its strengths on large, open areas – with larger tanks and a higher cleaning rate per charge.
Does the floor need to be swept or vacuumed first?+
No. The R3 Scrub Pro sweeps and scrubs in a single pass – pre-sweeping is not required. Two side brushes guide fine debris from edges and skirting boards to the centre, where it is picked up and collected in the debris bin (0.45 L).
Which floors is the R3 Scrub Pro suitable for?+
The R3 Scrub Pro is designed for hard floors. Selectable brush types – soft, standard and hard plus a microfibre roller – and up to 7 kg of brush pressure adapt the cleaning intensity to the floor covering while protecting the surface.

Experience the R3 Scrub Pro on your own floor.

On-site assessment and demonstration – free of charge and without obligation.

WA Tel Book a demo